Sale!
0.49” OLED Display
$7.90
Related products
-
WiFi Kit 32 (Phaseout) $13.00 -
2.4” OLED Display $23.99 -
0.91” OLED Display $7.80 -
1.54” OLED Display $15.50 – $15.90 -
1.3” OLED Display $9.60 – $9.90 -
0.96” OLED Display $7.99 – $8.90
0.49″ OLED display module with IIC interface (10K pull-up resistance already included in I2C bus), SSD1306 driver chip, use internal charge pump and very small size, very suitable for a test, also can be assembled in your products directly.
This product can’t meet your needs? Choose from our OLED Family.
0.49 Inch OLED is a part of the “OLED Display“ series, with the following features:
- Resolution：64 x 32；
- Onboard power-on reset circuit；
- Provide Arduino AVR C51 STM8 STM32 routine code；
- Support IIC(four pins) Interface only;
- Ultra-low power consumption: 0.08W when the whole screen is lit；
Technical Parameters
| Source | Parameter |
|---|---|
| Driver IC | SSD1306 |
| Power consumption | ≤10mA |
| color | White |
| VCC Input | 1.7V ~ 5V |
| Interface | IIC |
| OLED | 0.49 inch, Dot 64×32 |
| Size | 18 x 16 x 3.6 mm |
Oled Display Manual
Driver Chip Datasheet
0.49 Inch Module Specification
Heltec OLED Display product Difference Table
- Over View
-
0.49 Inch OLED is a part of the “OLED Display“ series, with the following features:
- Resolution：64 x 32；
- Onboard power-on reset circuit；
- Provide Arduino AVR C51 STM8 STM32 routine code；
- Support IIC(four pins) Interface only;
- Ultra-low power consumption: 0.08W when the whole screen is lit；
- Tech Specs
-
Technical Parameters
Source Parameter Driver IC SSD1306 Power consumption ≤10mA color White VCC Input 1.7V ~ 5V Interface IIC OLED 0.49 inch, Dot 64×32 Size 18 x 16 x 3.6 mm - Docs & Resource
-
Oled Display Manual
Driver Chip Datasheet
0.49 Inch Module Specification
Heltec OLED Display product Difference Table