Sale!
0.91” OLED Display
$7.80
0.91″ OLED display module with IIC interface (10K pull-up resistance already included in I2C bus), SSD1306 driver chip, use internal charge pump and very small size, very suitable for a test, also can be assembled in your products directly.
0.91 inch OLED is a part of the “OLED Display“ series, with the following features:
- resolution:128 x 32;
- Onboard power-on reset circuit;
- Provide Arduino AVR C51 STM8 STM32 routine code;
- Support IIC(four pins) interface only;
- Ultra-low power consumption: 0.08W when the whole screen is lit;
Technical Parameters
Source | Parameter |
---|---|
Driver IC | SSD1306 |
Power consumption | ≤21mA |
color | White |
VCC Input | 1.7V ~ 5V |
Interface | IIC |
OLED | 0.91 inch, Dot 128×32 |
Size | 38 x 13 x 4.1MM |
OLED display manual
Driver Chip Datasheet
0.91 Inch Module Specification
Heltec OLED Display product Difference Table
- Over View
-
0.91 inch OLED is a part of the “OLED Display“ series, with the following features:
- resolution:128 x 32;
- Onboard power-on reset circuit;
- Provide Arduino AVR C51 STM8 STM32 routine code;
- Support IIC(four pins) interface only;
- Ultra-low power consumption: 0.08W when the whole screen is lit;
- Tech Specs
-
Technical Parameters
Source Parameter Driver IC SSD1306 Power consumption ≤21mA color White VCC Input 1.7V ~ 5V Interface IIC OLED 0.91 inch, Dot 128×32 Size 38 x 13 x 4.1MM - Docs & Resource
-
OLED display manual
Driver Chip Datasheet
0.91 Inch Module Specification
Heltec OLED Display product Difference Table