Sale!

CubeCell – Dev-Board

$13.00 $10.90

Now it is pre-sale, the goods will be sent out on October 8th.

Clear
Category: SKU: ZC-51 Tags:

CubeCell (TM) is a new product series made by Heltec team, mainly for LoRa/LoRaWAN node applications.

CubeCell (TM) series is based on ASR605x (ASR6501, ASR6502), those chips are already integrated with the PSoC® 4000 series MCU (ARM® Cortex® M0+ Core) and SX1262. We have done a lot of migration and development, made it perfectly support Arduino®, can run the LoRaWAN protocol stably, can easily connect lithium batteries and solar panels.

HTCC-AB01 is a Dev-Board. Friendly designed for developers, easy to verify communication solutions.

Know more about CubeCell (TM) series

HTCC-AB01 is a part of the “CubeCell“ series, with the following features:

  • Perfect Arduino-Compatible!
  • CE and FCC certification;
  • Based on ASR605x (ASR6501, ASR6502), those chips are already integrated the PSoC® 4000 series MCU (ARM® Cortex® M0+ Core) and SX1262;
  • LoRaWAN 1.0.3 support;
  • Ultra low power design, 3.5uA in deep sleep;
  • Onboard solar energy management system, can directly connect with a 5.5~7V solar panel;
  • Onboard SH1.25-2 battery interface, integrated lithium battery management system (charge and discharge management, overcharge protection, battery power detection, USB / battery power automatic switching);
  • Micro USB interface with complete ESD protection, short circuit protection, RF shielding, and other protection measures;
  • Integrated CP2102 USB to serial port chip, convenient for program downloading, debugging information printing;
  • Good impendence matching and long communication distance.

Technical Parameters

Source Parameter
MCU ASR6501 (48 MHz ARM® Cortex® M0+ MCU, 128KB FLASH, 16KB SRAM )
LoRa Chip ASR6501 (Internal assembled Semtech® LoRa® Transceiver SX1262)
LoRa working band EU_433, CN_470_510, EU_863_870, US_902_928
LoRa maximum output power 22 ± 1dB
Hardware resources UART x 1; SPI x 1; I2C x 1; SWD x 1; PWM x 3
12 – bits ADC; 8 – channel DMA engine
6 x GPIO
FLASH 128KB internal FLASH
Interface Micro USB x 1; LoRa (IPEX) x 1
Size 41.5 x 24.1 x 7.2 mm
USB-UART bridge CP2102
Battery Type 3.7V Lithium (SH1.25 x 2 socket)
Battery detection circuit
External device power control(Vext)
Low power design Deep Sleep 3.5uA

Electrical characteristics

Electrical characteristics condition Minimum Typical Maximum
Power Supply USB powered (≥500mA) 4.7V 5V 6V
Lithium powered(≥250mA) 3.3V 3.7V 4.2V
3.3V(pin)powered(≥150mA) 2.7V 3.3V 3.5V
5V(pin)powered(≥500mA) 4.7V 5V 6V
Power consumption(mA) LoRa Rx Mode 10mA
LoRa 10dBm output 70mA
LoRa 14dBm output 90mA
LoRa 17dBm output 100mA
LoRa 20dBm output 105mA
Sleep Mode (USB powered) 9.6mA
Sleep Mode (VBAT/battery powered) 11uA
Sleep Mode (3.3V header powered) 3.5uA
Output 3.3V pin output 500mA
5V pin output (USB powered only) Equal to the input current
External device power control (Vext 3.3V) 350mA

CubeCell Series Source code

Heltec CubeCell series Arduino framework (the basic of CubeCell series products Arduino development environment): https://github.com/HelTecAutomation/ASR650x-Arduino

HTCC-AB01 Block Diagram

Heltec LoRa Node Porducts Difference Table (Product Selection Table)

Interesting applications made by CubeCell

Customer test report

Over View

HTCC-AB01 is a part of the “CubeCell“ series, with the following features:

  • Perfect Arduino-Compatible!
  • CE and FCC certification;
  • Based on ASR605x (ASR6501, ASR6502), those chips are already integrated the PSoC® 4000 series MCU (ARM® Cortex® M0+ Core) and SX1262;
  • LoRaWAN 1.0.3 support;
  • Ultra low power design, 3.5uA in deep sleep;
  • Onboard solar energy management system, can directly connect with a 5.5~7V solar panel;
  • Onboard SH1.25-2 battery interface, integrated lithium battery management system (charge and discharge management, overcharge protection, battery power detection, USB / battery power automatic switching);
  • Micro USB interface with complete ESD protection, short circuit protection, RF shielding, and other protection measures;
  • Integrated CP2102 USB to serial port chip, convenient for program downloading, debugging information printing;
  • Good impendence matching and long communication distance.
Tech Specs

Technical Parameters

Source Parameter
MCU ASR6501 (48 MHz ARM® Cortex® M0+ MCU, 128KB FLASH, 16KB SRAM )
LoRa Chip ASR6501 (Internal assembled Semtech® LoRa® Transceiver SX1262)
LoRa working band EU_433, CN_470_510, EU_863_870, US_902_928
LoRa maximum output power 22 ± 1dB
Hardware resources UART x 1; SPI x 1; I2C x 1; SWD x 1; PWM x 3
12 – bits ADC; 8 – channel DMA engine
6 x GPIO
FLASH 128KB internal FLASH
Interface Micro USB x 1; LoRa (IPEX) x 1
Size 41.5 x 24.1 x 7.2 mm
USB-UART bridge CP2102
Battery Type 3.7V Lithium (SH1.25 x 2 socket)
Battery detection circuit
External device power control(Vext)
Low power design Deep Sleep 3.5uA

Electrical characteristics

Electrical characteristics condition Minimum Typical Maximum
Power Supply USB powered (≥500mA) 4.7V 5V 6V
Lithium powered(≥250mA) 3.3V 3.7V 4.2V
3.3V(pin)powered(≥150mA) 2.7V 3.3V 3.5V
5V(pin)powered(≥500mA) 4.7V 5V 6V
Power consumption(mA) LoRa Rx Mode 10mA
LoRa 10dBm output 70mA
LoRa 14dBm output 90mA
LoRa 17dBm output 100mA
LoRa 20dBm output 105mA
Sleep Mode (USB powered) 9.6mA
Sleep Mode (VBAT/battery powered) 11uA
Sleep Mode (3.3V header powered) 3.5uA
Output 3.3V pin output 500mA
5V pin output (USB powered only) Equal to the input current
External device power control (Vext 3.3V) 350mA
Docs & Resource

CubeCell Series Source code

Heltec CubeCell series Arduino framework (the basic of CubeCell series products Arduino development environment): https://github.com/HelTecAutomation/ASR650x-Arduino

HTCC-AB01 Block Diagram

Heltec LoRa Node Porducts Difference Table (Product Selection Table)

Interesting applications made by CubeCell

Customer test report

Test Info
Accessories