Sale!

CubeCell – Capsule Sensor

$15.30 – $21.00

Now it is pre-sale, the goods will be sent out on October 8th.

Clear
Category: SKU: N/A Tags:

Related products

CubeCell (TM) is a new product series made by Heltec team, mainly for LoRa/LoRaWAN node applications.

CubeCell (TM) series is based on ASR605x (ASR6501, ASR6502), those chips are already integrated into the PSoC® 4000 series MCU (ARM® Cortex® M0+ Core) and SX1262. We have done a lot of migration and development, made it perfectly support Arduino®, can run the LoRaWAN protocol stably, and can easily connect lithium batteries and solar panels.

HTCC-AC01 is a LoRa end node sensor. With a complete enclosure and protection measures, it can be deployed directly into real-world applications.

Know more about CubeCell (TM) series

capsule001
capsule_red
capsule_blue

HTCC-AC01 is a part of the “CubeCell“ series, with the following features:

  • Perfect Arduino-Compatible!
  • CE and FCC certification;
  • Internal RGB light;
  • Based on ASR605x (ASR6501, ASR6502), those chips are already integrated the PSoC® 4000 series MCU (ARM® Cortex® M0+ Core) and SX1262;
  • LoRaWAN 1.0.3 support;
  • Ultra low power design, 3.5uA in deep sleep;
  • Onboard solar energy management system, can directly connect with a 5.5~7V solar panel;
  • Reserved battery solder pad;
  • Good impendence matching and long communication distance.

Technical Parameters

Source Parameter
MCU ASR6501 (48 MHz ARM® Cortex® M0+ MCU, 128KB FLASH, 16KB SRAM )
LoRa Chip ASR6501 (Internal assembled Semtech® LoRa® Transceiver SX1262)
LoRa working band EU_433, CN_470_510, EU_863_870, US_902_928
LoRa maximum output power 22 ± 1dB
Hardware resources UART x 1; SPI x 1; I2C x 1; SWD x 1; PWM x 3
12 – bits ADC; 8 – channel DMA engine
6 x GPIO
FLASH 128KB internal FLASH
Interface Micro USB x 1; LoRa (IPEX) x 1
Size 15mm diameter, 67mm in length
USB-UART bridge none
Battery Type 3.7V Lithium (solder pad)
Battery detection circuit √
External device power control（Vext） √
Low power design Deep Sleep 3.5uA

Electrical characteristics

Electrical characteristics condition Minimum Typical Maximum
Power Supply USB powered (≥500mA) 4.7V 5V 6V
Lithium powered（≥250mA） 3.3V 3.7V 4.2V
3.3V（pin）powered（≥150mA） 2.7V 3.3V 3.5V
5V（pin）powered（≥500mA） 4.7V 5V 6V
Power consumption(mA) LoRa Rx Mode 10mA
LoRa 10dBm output 70mA
LoRa 14dBm output 90mA
LoRa 17dBm output 100mA
LoRa 20dBm output 105mA
Sleep Mode (VBAT/battery powered) 11uA
Sleep Mode (3.3V header powered) 3.5uA
Output 3.3V pin output 500mA
External device power control (Vext 3.3V） 350mA

How to install CubeCell Arduino Development Environment

CubeCell Series Source code

Heltec CubeCell series Arduino framework (the basic of CubeCell series products Arduino development environment): https://github.com/HelTecAutomation/ASR650x-Arduino

HTCC-AC01 Pin out Diagram

https://github.com/HelTecAutomation/ASR650x-Arduino/blob/master/PinoutDiagram/HTCC-AC01.pdf

Heltec LoRa Node Porducts Difference Table (Product Selection Table)

https://docs.heltec.cn/#/zh_CN/products/lora/lora_node/heltec_lora_node_list_eu

Summary of Common Problems (F&Q Page)

https://docs.heltec.cn/#/en/faq/cubecell_series_common_problem_summary

Interesting applications made by CubeCell

Customer test report

LoRa 470MHz RF Power Output

LoRa 868MHz RF Power Output

Maximum communication distance test

Low power test in sleep mode

Over View

HTCC-AC01 is a part of the “CubeCell“ series, with the following features:

  • Perfect Arduino-Compatible!
  • CE and FCC certification;
  • Internal RGB light;
  • Based on ASR605x (ASR6501, ASR6502), those chips are already integrated the PSoC® 4000 series MCU (ARM® Cortex® M0+ Core) and SX1262;
  • LoRaWAN 1.0.3 support;
  • Ultra low power design, 3.5uA in deep sleep;
  • Onboard solar energy management system, can directly connect with a 5.5~7V solar panel;
  • Reserved battery solder pad;
  • Good impendence matching and long communication distance.
Tech Specs

Technical Parameters

Source Parameter
MCU ASR6501 (48 MHz ARM® Cortex® M0+ MCU, 128KB FLASH, 16KB SRAM )
LoRa Chip ASR6501 (Internal assembled Semtech® LoRa® Transceiver SX1262)
LoRa working band EU_433, CN_470_510, EU_863_870, US_902_928
LoRa maximum output power 22 ± 1dB
Hardware resources UART x 1; SPI x 1; I2C x 1; SWD x 1; PWM x 3
12 – bits ADC; 8 – channel DMA engine
6 x GPIO
FLASH 128KB internal FLASH
Interface Micro USB x 1; LoRa (IPEX) x 1
Size 15mm diameter, 67mm in length
USB-UART bridge none
Battery Type 3.7V Lithium (solder pad)
Battery detection circuit √
External device power control（Vext） √
Low power design Deep Sleep 3.5uA

Electrical characteristics

Electrical characteristics condition Minimum Typical Maximum
Power Supply USB powered (≥500mA) 4.7V 5V 6V
Lithium powered（≥250mA） 3.3V 3.7V 4.2V
3.3V（pin）powered（≥150mA） 2.7V 3.3V 3.5V
5V（pin）powered（≥500mA） 4.7V 5V 6V
Power consumption(mA) LoRa Rx Mode 10mA
LoRa 10dBm output 70mA
LoRa 14dBm output 90mA
LoRa 17dBm output 100mA
LoRa 20dBm output 105mA
Sleep Mode (VBAT/battery powered) 11uA
Sleep Mode (3.3V header powered) 3.5uA
Output 3.3V pin output 500mA
External device power control (Vext 3.3V） 350mA
Docs & Resource

How to install CubeCell Arduino Development Environment

CubeCell Series Source code

Heltec CubeCell series Arduino framework (the basic of CubeCell series products Arduino development environment): https://github.com/HelTecAutomation/ASR650x-Arduino

HTCC-AC01 Pin out Diagram

https://github.com/HelTecAutomation/ASR650x-Arduino/blob/master/PinoutDiagram/HTCC-AC01.pdf

Heltec LoRa Node Porducts Difference Table (Product Selection Table)

https://docs.heltec.cn/#/zh_CN/products/lora/lora_node/heltec_lora_node_list_eu

Summary of Common Problems (F&Q Page)

https://docs.heltec.cn/#/en/faq/cubecell_series_common_problem_summary

Interesting applications made by CubeCell

Customer test report

Test Info

LoRa 470MHz RF Power Output

LoRa 868MHz RF Power Output

Maximum communication distance test

Low power test in sleep mode

Accessories
Category: CubeCell