+86 028 6237 4838
You are here:
Mesh Node T114 (Rev. 1.0)
$27.90 – $41.70
What's this?
The new Mesh Node T114 (V2) is back!
Description
Add an Accessories
Characteristics
No Reviews
Description
Summary
Mesh Node T114 is a Low Power Consumption development board based on nRF52840 and SX1262, supports LoRa and Bluetooth 5.0 . which integrated various power interfaces (5V USB, lithium battery and solar panel) optional 1.14 inch TFT display and GPS module as accessories, and has powerful long-distance communication capabilities, scalability, and low power design.
With Heltec nRF52 development environment and libraries. you can use it for LoRa/LoRaWAN development work, and also use it to run some open source projects, such as Meshtastic.
Main Features
- MCU nRF52840 (Bluetooth), LoRa chipset SX1262.
- Powerful display function (optional), onboard 1.14 inch TFT-LCD display contains 135(H)RGB x240(V) dots and can display up to 262k colors.
- Low power consumption, 11 uA in deep sleep.
- Operation condition: -20 ~ 70℃, 90%RH(No condensing).
- Type-C USB interface with a complete voltage regulator, ESD protection, short circuit protection, RF shielding, and other protection measures.
- Compatible with Arduino, we provide development frameworks and libraries.
- Various Interfaces: 1.25*2P LiPo connector, 1.25*2P Solar panel connector, 1.25*8P GNSS module connector, which greatly increase the extensibility of the board.
Specifications
| Parameters | Description |
|---|---|
| MCU | nRF52840 |
| LoRa Node Chip | SX1262 |
| Frequency | 470~510MHz; 863~870MHz; 902~928MHZ. |
| Max. TX Power | 21±1dBm |
| Max. Receiving sensitivity | -135dBm@SF12 BW=125KHz |
| Bluetooth | Bluetooth LE: Bluetooth 5, Bluetooth mesh |
| Hardware Resource | USB 2.0, 4 * SPI, 2 * TWI, 2 * UART, 4 * PWM, QPSI, 12S, PDM, QDEC Etc. |
| Memory | 1M ROM 256KB SRAM |
| Interface | Type-C USB 2*1.25 lithium battery connector 2*1.25 solar panel connector LoRa ANT (IPEX1.0) 8*1.25 GPS module connector 2*13*2.54 Header Pin |
| Battery | 3~4.2V battery power supply and charge. |
| Operating Temperature | -20 ~ 70 ℃ |
| Dimensions | 50.80*22.86mm |
| Electrical characteristics | Deep Sleep: ~11uA Tracker mode sleep: ~22uA GPS OFF, TFT OFF: ~9mA GPS OFF, TFT ON: ~20mA GPS ON, TFT ON: ~51mA |
| Display | onboard 1.14 inch TFT-LCD display |
Description
Pin Map
High light
Dimension
FAQ
The 2.4GHz antenna is a multilayer ceramic antenna for BlueTooth communications, it can’t be replaced.
- Arduino
- PlatformIO
In addition to Meshtastic support, we have also developed a complete LoRaWAN protocol in the nRF52 Arduino framework.
You can find this type of socket by search “SH1.25 x 2”.
The maximum capacity of the shell for carrying batteries is 42 * 28mm, and the default 3.7V lithium battery size is 41 * 24mm
Just download the screenless version firmware and enter the 123456 password.
5V~6.5V, it is recommended to connect solar panels with a voltage of around 5V.
Not time ago, customer reports that some of the Mesh Node T114 works as a Meshtastic device and tries to send long strings (>50 chars) ONLY in Long-Fast mode (SF11, 250K BW), sometimes sending messages may fail.
- For a detailed description of this matter, please refer to this link:
https://github.com/meshtastic/firmware/issues/4723#issuecomment-2369336696
- For a detailed report, Heltec solution, and compensation regarding this matter, please refer to this link
https://github.com/meshtastic/firmware/issues/4723#issuecomment-2404889735
Docs & Resource
- [Docs] — User Manual
- [Resource] —Heltec nRF52 framework and Lib
- [Resource] —SnapEmu IoT Platform
- [Attachment] — V1.x Shematic diagram
- [Attachment] — V2.x Schematic diagram
- [Attachment] — Datasheet
- [Attachment] — TFT-LCD Datasheet
- [Resource] — Related Resources
Project
Packing list
The default packing list without selecting any accessories is as follows:
| Item | Quantity |
|---|---|
| Mesh Node T114 | x1 |
| LoRa Antenna | x1 |
| SH1.25×2 Battery Connector | x2 |
| 2.54 *13 Header Pin | x2 |
| L76K GNSS (Available when GPS selected) | x1 |
| Protect Shell and Transfer LoRa antenna (Available when Shell selected) | x1 |
Add an Accessories
Recommend accessories for Mesh Node T114 (Rev. 1.0)
HT-M7603 Indoor LoRa Gateway
Original price was: $119.00.$89.00Current price is: $89.00.
Bread Board
$1.10
HT-M02 Edge LoRa Gateway (V2)
$229.00 – $299.00Related products
-
HT-AT62 $5.90 -
Wireless Tracker $22.90 -
HT1303 LoRaWAN Concentrator Module Original price was: $89.00.$49.00Current price is: $49.00.
Characteristics
| Weight | 35 g |
|---|---|
| Dimensions | 5.8 × 2.286 × 0.968 cm |
| LoRa Band | 433MHz, 470~510MHz, 863~870MHz, 902~928MHz |
| Need Display? | Yes, No |
| Need GPS? | Yes, No |
| Need Shell? | Yes, No |
Reviews
There are no reviews yet.