Wifi Kit 8
$7.59
note
accessories
reseller
- Include antenna;
- Include SH1.25 x 2 battery connecter;
- Not include battery;
- 3.7V/1000mAh lithium(Sale only for mainland China)
- Cooling rib
Out of stock
Related products
-
CubeCell - Module $8.60 -
CubeCell - Dev-Board $11.90 -
2.4” OLED Display $19.99 -
0.49” OLED Display $2.59 -
1.54” OLED Display $10.90 -
0.96” OLED Display $2.99 – $3.60
WiFi Kit 8 is a classic IoT dev-board designed & produced by Heltec Automation(TM), it’s a highly integrated product based on ESP8266 (Wi-Fi), Li-Po battery management system, 0.91″ OLED is also included. It’s the best choice for smart cities, smart farms, smart homes, and IoT makers.
This product can’t meet your needs? Choose from the Heltec LoRa Node family. Or have a quick look about the CubeCell series.
WiFi Kit 8 is a part of the “Heltec ESP Arduino“ series, with the following features:
- Microprocessor: ESP8266 ;
- Micro USB interface with a complete voltage regulator, ESD protection, short circuit protection, RF shielding, and other protection measures;
- Onboard SH1.25-2 battery interface, integrated lithium battery management system (charge and discharge management, overcharge protection, battery power detection, USB / battery power automatic switching);
- Onboard 2.4GHz (for Wi-Fi) PCB antenna;
- Onboard 0.91-inch 128*32 dot matrix OLED display, which can be used to display debugging information, battery power and other information;
- Integrated CP2104 USB to serial port chip, convenient for program downloading, debugging information printing;
- Compatible with the Arduino development environment.
Technical Parameters
Electrical characteristics
How to install "Heltec ESP Arduino" Development Environment
Heltec ESP8266 Series Source code
Heltec ESP(ESP32 & ESP8266) framework (the basic of Heltec ESP series products Arduino running environment): https://github.com/Heltec-Aaron-Lee/WiFi_Kit_series
Heltec ESP8266 library (must work with Heltec ESP framework): https://github.com/HelTecAutomation/Heltec_ESP8266
WiFi Kit 8 Pin out Diagram
WiFi Kit 8 Schematic Diagram
Heltec ESP Arduino Porducts Difference Table (Product Selection Table)
Frequently Asked Questions
AutoCAD Drawing
AutoCAD 2017 version drawding: http://resource.heltec.cn/download/WiFi_Kit_8/kit8.dwg
Interesting applications made by WiFI Kit 8
- WIFI Kit 8 dedicated 3D printing shell (thanks to Carl E. Mankinen): https://www.thingiverse.com/thing:3255436
- User test report: https://robotzero.one/heltec-wifi-kit-8/
- Arduino-based Camera Slider project using Blynk: https://community.blynk.cc/t/arduino-based-camera-slider-project-using-blynk/45366
- Over View
-
WiFi Kit 8 is a part of the “Heltec ESP Arduino“ series, with the following features:
- Microprocessor: ESP8266 ;
- Micro USB interface with a complete voltage regulator, ESD protection, short circuit protection, RF shielding, and other protection measures;
- Onboard SH1.25-2 battery interface, integrated lithium battery management system (charge and discharge management, overcharge protection, battery power detection, USB / battery power automatic switching);
- Onboard 2.4GHz (for Wi-Fi) PCB antenna;
- Onboard 0.91-inch 128*32 dot matrix OLED display, which can be used to display debugging information, battery power and other information;
- Integrated CP2104 USB to serial port chip, convenient for program downloading, debugging information printing;
- Compatible with the Arduino development environment.
- Tech Specs
-
Technical Parameters
Electrical characteristics
- Docs & Resource
-
How to install "Heltec ESP Arduino" Development Environment
Heltec ESP8266 Series Source code
Heltec ESP(ESP32 & ESP8266) framework (the basic of Heltec ESP series products Arduino running environment): https://github.com/Heltec-Aaron-Lee/WiFi_Kit_series
Heltec ESP8266 library (must work with Heltec ESP framework): https://github.com/HelTecAutomation/Heltec_ESP8266
WiFi Kit 8 Pin out Diagram
WiFi Kit 8 Schematic Diagram
Heltec ESP Arduino Porducts Difference Table (Product Selection Table)
Frequently Asked Questions
AutoCAD Drawing
AutoCAD 2017 version drawding: http://resource.heltec.cn/download/WiFi_Kit_8/kit8.dwg
Interesting applications made by WiFI Kit 8
- WIFI Kit 8 dedicated 3D printing shell (thanks to Carl E. Mankinen): https://www.thingiverse.com/thing:3255436
- User test report: https://robotzero.one/heltec-wifi-kit-8/
- Arduino-based Camera Slider project using Blynk: https://community.blynk.cc/t/arduino-based-camera-slider-project-using-blynk/45366