The Sufficient IoT Hub is a Linux system-in-package with a dual-core 64-bit ARM A7 processor running at 1GHz and 128MB of DDR3. This is an IoT-only device that includes LoRa, Wi-Fi, and Bluetooth. We created a dedicated Sufficient IoT OS for it (Linux 5.4.61 Kernel, Debian10), which also includes a CLI application and web UI…
In practical application, the working environment of the equipment may not be as good as anticipated, and may even be very bad… For example, the site may experience significant vibration, noise, dust, high temperatures, and other issues in an industrial setting. Sunlight and rain, low winter temperatures, and high summer temperatures are unavoidable in a…
In order to meet the user’s requirements for high performance and small size, we designed this product. On the basis of WiFi LoRa 32, it’s has a smaller size, 0.49″ OLED display, and better RF characteristics. This product can’t meet your needs? Choose from the Heltec Products Selecter. Over View Datasheet Docs & Resource Wireless…
The Heltec LoRa Series Module HT-RA62 was designed and developed by Heltec Automation. The module is used for ultra-long-range spread spectrum communication, and its RF chip SX1262 mainly adopts LoRa remote modem for ultra-long-range spread spectrum communication with high interference immunity and low power consumption. With SEMTECH’s patented LoRa modulation technology, the SX1262 has a…
HT-CT62 is a LoRa/LoRaWAN node module with a long communication range, low power consumption, high sensitivity, and low cost. The module is composed of ESP32-C3FN4 (32-bit microprocessor based on RISC-V architecture) and Semtech LoRa Transceivers (SX1262). The module integrates 2.4 GHz Wi-Fi and LoRa two-mode wireless communication. HT-CT62 is a small volume, stamp hole package…
WiFi LoRa 32 is a classic IoT dev-board designed & produced by Heltec Automation. Since its launch in 2017, it has been loved by developers and makers. The newly launched V3 version has the same pin sequence as the V2 version and retains Wi-Fi, BLE, LoRa, OLED display, and other functions. It is the best…
HTIT-Wsh (Wireless shell) is a long communication range, high receive sensitivity, low power consumption(9uA), and low-cost LoRa node module. The HTIT-Wsh is composed of an MCU (ESP32-S3FN8) and Semtech LoRa Transceivers (SX1262). 38.4 x 16.1 x 3.2(mm) size with 1.27mm stamp holes package makes it can be assembled into your PCB or products directly. HTIT-Wsh…
HTCC-AM01 is a Cubecell(TM) Series made by the Heltect team, mainly for LoRa/LoRaWAN node applications. it has the characteristics of long communication range, high receive sensitivity, low power consumption, and low cost. HTCC-AM01 is based on ASR6052, the chip is already integrated with the PSoC® 4000 series MCU (ARM® Cortex® M0+ Core) and SX1262. Regarding…
WiFi kit 32 is a classic IoT Dev-board designed&produced by Heltec Automation(TM), It’s a highly integrated product based on ESP32(including WiFI and BLE), Li-Po battery management system,0.96” OLED are also included. It’s the best choice for smart citites,farms homes,and IoT makers. This product can’t meet your needs? Choose from the Heltec Products Selecter. Over View…
ESP32-C3 is a development board based on the ESP32-C3FN4 chip. ESP32-C3FN4 is a 32-bit microprocessor based on RISC-V architecture. It is a very low-power and high-integration MCU system-level chip (SOC), integrating 2.4 GHz Wi-Fi and low-power Bluetooth (Bluetooth® LE) dual-mode wireless communication. Internal integration 4MB flash, contains SPI, I2C, UART, ADC, etc. It is the…
