Heltec Automation

Establishing connection

HELTEC image
HELTEC KNOWLEDGE NETWORK / FAQ DETAIL
Q

## The serial port does not exist.

Public FAQ1 response1 from Heltec team
01 / RESPONSE STREAM

Answers & Discussion

01 ENTRIES

Follow the conversation from the Heltec team and the community.

  1. Heltec teamOFFICIAL RESPONSE

    1. Open your DEVICE MANAGER, check to see if the device port can be found. If not, please refer to the previous topic “I can’t find serial port”. 1. Please check if your serial port is opened elsewhere. 1. Enter the BootLoader mode to upload, there are two ways to enter the mode: - connect the USB cable, hold down the User (or ORG or Boot) key, press RST once, and then release the User (or ORG or Boot) key. - Hold down the User (or ORG or Boot) key, then connect the USB cable.