01 / RESPONSE STREAM
Answers & Discussion
01 ENTRIESFollow the conversation from the Heltec team and the community.
- Heltec teamOFFICIAL RESPONSE
If your gateway is set to WiFiClient mode and you can’t find its IP or can’t get in, you can: 1. Connect your device directly to your computer’s network port with a network cable and access 192.168.4.1 through your browser with account HT-M02 and password heltec.org. Please refer to the [UserManual](<https://docs.heltec.cn/en/gateway/ht-m02_v2/index.html>) for specific methods. 1. If you cannot use the network port, open the side cover of the device and enter ifconfig through the serial port to obtain the IP address.