Answers & Discussion
01 ENTRIESFollow the conversation from the Heltec team and the community.
- Heltec teamOFFICIAL RESPONSE
**Note: The following content only applies to hardware V4.3 and above** - Meshtastic 2.7.20: On the device, use the PRG button to navigate to “System” → “LoRa”, where you can choose to enable or disable LNA. - MeshCore 1.15.0: LNA is enabled by default and cannot be modified. - You can download the firmware from this link, which has LNA disabled by default: **[LNA Disable](<https://resource.heltec.cn/download/WiFi_LoRa_32_V4/firmware/meshcore/heltec-v4.3-meshcore-1.14.zip>)** - With the firmware from this link, LNA can be toggled via button long press: [**LNA configurable**](<https://resource.heltec.cn/download/WiFi_LoRa_32_V4/firmware/meshcore/LNA_Config.zip>) - We have submitted a PR. In the near future, official firmware will also support toggling LNA via command line or button.