0.96″ OLED display module with I2C (or SPI) interface (10K pull-up resistance already included in I2C bus), SSD1306 driver chip, use internal charge pump, elliptical fixed hole (fit M2 screw). It’s a well-established product and had been used in many situations.
0.96`` OLED Module is a Part of the “OLED Display“ series, with the following features:
- Display Resolution: 128 x 64;
- On board power-on auto reset circuit;
- Internal charge pump (for OLED panel power supply);
- I2C (2.54 x 4) or SPI (2.54 x 6) interface optional;
- 0.5 x 6 FFC footprint (SPI version only);
- Default I2C address: 0x3C, for some MCU with 8-bit I2C register, the I2C address should be 0x78 (0x3C << 1).
Technical Parameters
Source | Parameter |
---|---|
Driver Chip | SSD1306 |
Working Temperature | -30 ~ 80 ℃ |
Color | White, Blue, Yellow & Blue (128*16 yellow, 128*48 blue) |
Power Supply | 1.7V ~ 6V |
Interface | SPI (2.54 x 6) or IIC (2.54 x 4) optional |
Display Resolution | 0.96 inch, Dot 128×64 |
Size | 27 x 27 x 3.6 mm |
DataSheet & User Manual
- Heltec OLED Module Summary: https://resource.heltec.cn/download/oled/OLED_Summary.pdf
- 0.96″ OLED Datasheet: https://resource.heltec.cn/download/oled/096/0.96oled-specification.pdf
- SSD1306 Datasheet: https://resource.heltec.cn/download/oled/SSD1306-Revision_1.1_(Charge_Pump).pdf
0.96" OLED Arduino Example Code
- This is a basic example library for test: https://github.com/Heltec-Aaron-Lee/heltec0.96OLED
We highly recommend use “u8g2” library, search “u8g2” in Arduino library manager and install:
AutoCAD 2017 Outline Drawing
AutoCAD 2017 Outline Drawing: https://resource.heltec.cn/download/oled/OLED.dwg
Heltec OLED Display product Difference Table (Selection Table)
Heltec OLED Display Common Problem Summary
Want Buy some OLED Display without PCB?
- Over View
-
0.96`` OLED Module is a Part of the “OLED Display“ series, with the following features:
- Display Resolution: 128 x 64;
- On board power-on auto reset circuit;
- Internal charge pump (for OLED panel power supply);
- I2C (2.54 x 4) or SPI (2.54 x 6) interface optional;
- 0.5 x 6 FFC footprint (SPI version only);
- Default I2C address: 0x3C, for some MCU with 8-bit I2C register, the I2C address should be 0x78 (0x3C << 1).
- Tech Specs
-
Technical Parameters
Source Parameter Driver Chip SSD1306 Working Temperature -30 ~ 80 ℃ Color White, Blue, Yellow & Blue (128*16 yellow, 128*48 blue) Power Supply 1.7V ~ 6V Interface SPI (2.54 x 6) or IIC (2.54 x 4) optional Display Resolution 0.96 inch, Dot 128×64 Size 27 x 27 x 3.6 mm - Docs & Resource
-
DataSheet & User Manual
- Heltec OLED Module Summary: https://resource.heltec.cn/download/oled/OLED_Summary.pdf
- 0.96″ OLED Datasheet: https://resource.heltec.cn/download/oled/096/0.96oled-specification.pdf
- SSD1306 Datasheet: https://resource.heltec.cn/download/oled/SSD1306-Revision_1.1_(Charge_Pump).pdf
0.96" OLED Arduino Example Code
- This is a basic example library for test: https://github.com/Heltec-Aaron-Lee/heltec0.96OLED
We highly recommend use “u8g2” library, search “u8g2” in Arduino library manager and install:
AutoCAD 2017 Outline Drawing
AutoCAD 2017 Outline Drawing: https://resource.heltec.cn/download/oled/OLED.dwg
Heltec OLED Display product Difference Table (Selection Table)
Heltec OLED Display Common Problem Summary
Want Buy some OLED Display without PCB?