Micro-USB
Integrated CP2102 USB to serial port chip, convenient for program.
ESP32 + SX1262 LoRa Node device, 8MB PSRAM and 8MB FLASH, LoRa bridge device
WiFi and Bluetooth have been widely used in various scenarios, especially in terms of communication speed, which have obvious advantages. Almost all mobile phones now integrate WiFi and Bluetooth functions, but the communication distance is their shortcoming. Is there any hardware that can combine the long-distance advantages of LoRa with the advantages of WiFi/Bluetooth?
Wireless Bridge is such a product. Based on ESP32 and SX1276 chips, onboard 8M Byte SDRAM and 8M Byte FLASH, WiFi and Bluetooth can work at the same time. It is a bridge that converts “WiFi/Bluetooth – LoRa” signals to each other.
Info The wireless bridge is a development Board that requires downloading the corresponding code to run.

MTK7628 Processor and SX1302 + SX1255 LoRaWAN gateway, Ethernet, Wi-Fi
$89.00
RK3566 Quad-core Cortex-A55 64-bit 1.8GHz CPU, Linux edge computing, SX1302 + SX1250 LoRaWAN Gateway
$229.00
ESP32 + SX1302 LoRaWAN gateway, with TFT display, LoRaWAN signal sniffing, signal coverage testing, and on-site debugging.
$79.00
ESP32S3R8 + SX1262 LoRa Node, Meshtastic, MeshCore and LoRaWAN Compatible
$17.90
ESP32S3R8 + SX1262 LoRa Node, Meshtastic, MeshCore and LoRaWAN Compatible
$21.90
Multifunctional expansion enclosure designed specifically for the WiFi LoRa 32 V4.3 - R8
$66.90Current product
Wireless Bridge
Note: This wireless bridge is a development board; it requires further development to function properly.
WiFi and Bluetooth are widely used in various scenarios, especially for communication speed, which offers clear advantages. Almost all mobile phones now integrate WiFi and Bluetooth functions, but their communication distance is a shortcoming. Is there any hardware that can combine the long-distance advantages of LoRa with the advantages of WiFi/Bluetooth?
Wireless Bridge is such a product. Based on ESP32 and SX1276 chips, onboard 8M Byte SDRAM and 8M Byte FLASH, WiFi and Bluetooth can work at the same time. It is a bridge that converts “WiFi/Bluetooth – LoRa” signals to each other.
| Parameters | Description |
|---|---|
| Master Chip | ESP32-D0WDQ6 |
| LoRa Chipset | SX1276 |
| USB to Serial Chip | CP2102 |
| Frequency | 470 ~ 510MHz, 863 ~ 928MHz |
| Max. TX Power | 18d B ± 1d B |
| Max. Receiving Sensitivity | -135dBm |
| Wi-Fi | 802.11 b/g/n, up to 150Mbps |
| Bluetooth | Bluetooth V4.2 BR/EDR and Bluetooth LE sepcification |
| Memory | 8MB(64M-bits) SPI FLASH, · internal 520KB SRAM, · 8MB(64M-bits) PSRAM |
| Battery | 3.7V lithium battery power supply and charging |
| Operating temperature | -20 ~ 70 ℃ |
| Dimensions | 66(+10) x 30 x 15 mm |
| Interface | Micro USB*1; · LoRa Antenna interface(SMA); · 2.4G Antenna interface(SMA) |
| Low Power | Deep sleep 800μA |
The default packing list without selecting any accessories is as follows:
| Item | Quantity |
|---|---|
| Wireless Stick | x1 |
| LoRa Antenna | x1 |
| Wi-Fi Antenna | x1 |
| USB cable | x1 |
No. The current version is actually a development kit that requires you to set up features through code, and we provide the development environment: Heltec ESP32 development framework
Yes, but the battery interface is inside the device, and the shell needs to be opened. The interface is 1.25X2 lithium battery interface.
Customer reviews for this product will appear here when available.
Markdown is supported. Switch between editing and previewing your message.

MTK7628 Processor and SX1302 + SX1255 LoRaWAN gateway, Ethernet, Wi-Fi
$89.00
RK3566 Quad-core Cortex-A55 64-bit 1.8GHz CPU, Linux edge computing, SX1302 + SX1250 LoRaWAN Gateway
$229.00
ESP32 + SX1302 LoRaWAN gateway, with TFT display, LoRaWAN signal sniffing, signal coverage testing, and on-site debugging.
$79.00
ESP32S3R8 + SX1262 LoRa Node, Meshtastic, MeshCore and LoRaWAN Compatible
$17.90
ESP32S3R8 + SX1262 LoRa Node, Meshtastic, MeshCore and LoRaWAN Compatible
$21.90
Multifunctional expansion enclosure designed specifically for the WiFi LoRa 32 V4.3 - R8
$66.90Note: This wireless bridge is a development board; it requires further development to function properly.
WiFi and Bluetooth are widely used in various scenarios, especially for communication speed, which offers clear advantages. Almost all mobile phones now integrate WiFi and Bluetooth functions, but their communication distance is a shortcoming. Is there any hardware that can combine the long-distance advantages of LoRa with the advantages of WiFi/Bluetooth?
Wireless Bridge is such a product. Based on ESP32 and SX1276 chips, onboard 8M Byte SDRAM and 8M Byte FLASH, WiFi and Bluetooth can work at the same time. It is a bridge that converts “WiFi/Bluetooth – LoRa” signals to each other.
| Parameters | Description |
|---|---|
| Master Chip | ESP32-D0WDQ6 |
| LoRa Chipset | SX1276 |
| USB to Serial Chip | CP2102 |
| Frequency | 470 ~ 510MHz, 863 ~ 928MHz |
| Max. TX Power | 18d B ± 1d B |
| Max. Receiving Sensitivity | -135dBm |
| Wi-Fi | 802.11 b/g/n, up to 150Mbps |
| Bluetooth | Bluetooth V4.2 BR/EDR and Bluetooth LE sepcification |
| Memory | 8MB(64M-bits) SPI FLASH, · internal 520KB SRAM, · 8MB(64M-bits) PSRAM |
| Battery | 3.7V lithium battery power supply and charging |
| Operating temperature | -20 ~ 70 ℃ |
| Dimensions | 66(+10) x 30 x 15 mm |
| Interface | Micro USB*1; · LoRa Antenna interface(SMA); · 2.4G Antenna interface(SMA) |
| Low Power | Deep sleep 800μA |
The default packing list without selecting any accessories is as follows:
| Item | Quantity |
|---|---|
| Wireless Stick | x1 |
| LoRa Antenna | x1 |
| Wi-Fi Antenna | x1 |
| USB cable | x1 |
No. The current version is actually a development kit that requires you to set up features through code, and we provide the development environment: Heltec ESP32 development framework
Yes, but the battery interface is inside the device, and the shell needs to be opened. The interface is 1.25X2 lithium battery interface.
Customer reviews for this product will appear here when available.
Markdown is supported. Switch between editing and previewing your message.

863~870 MHz, 902~928MHz SMA antenna
$3.90
IPEX (V1) - SMA converter cable, RF1.13
$0.90
SMA antenna and its corresponding IPEX-SMA adapter cable
$0.90