+86 028 6237 4838
You are here:
LoRa Node 151
$16.80
What's this?
Based on ultra low power design, we launched LoRa Node 151， adopting the STM32L151CCU6 MCU (support DFU mode) and SX127x LoRa chip, use 1/2 AA Lithium chlorine sulfite battery.
Description
Add an Accessories
Characteristics
No Reviews
Description
Summary
Based on ultra low power design, we launched LoRa Node 151， adopting the STM32L151CCU6 MCU (support DFU mode) and SX127x LoRa chip, use 1/2 AA Lithium chlorine sulfite battery. Enter low power mode under the standard LoRaWAN protocol, the Deep Sleep Current ≤ 1.8uA.
Main Features
- CE Certificate;
- Microprocessor: STM32L151CBU6 (Ultra-low-power ARM Cortex-M3 MCU with 128 Kbytes Flash), with LoRa node chip SX1278 (433MHz ~ 510MHz);
- Onboard user resources available: 256 Kbytes of Flash memory with ECC; 32 Kbytes of RAM; 8 Kbytes of true EEPROM with ECC; 128-byte backup register.
- Micro USB interface with a complete voltage regulator, ESD protection, short circuit protection, and other protection measures;
- 1/2 AA battery shell, use 1/2 AA Lithium chlorine sulfite battery (this battery can’t charge, but onboard USB / battery power automatic switching allows connect USB when the battery is assembled);
- Reserve SMA antenna interface for LoRa use
- Download the firmware via DFU or ST-LINK;
- Provide complete LoRaWAN(ClassA/C) source code(support ABP and OTAA);
- With good RF circuit design and basic low-power design (sleep current: 1.8uA), it is convenient for IoT application vendors to quickly verify solutions and deploy applications;
Specifications
| Parameters | Description | Master Chip | STM32L151CBU6(Ultra-low-power 32-bit MCU ARM®-based Cortex®-M3) |
|---|---|
| LoRa Chipset | SX1278/SX1276 |
| Frequency | 470~510MHz, 863~928MHz |
| Max. TX Power | 19 ± 1dBm |
| Max. Receiving sensitivity | -135dBm |
| Operating temperature | -20 ~ 70 ℃ |
| Dimensions | 56.6 x 24 x 20 mm |
| Interface | Micro USB x 1; LoRa Antenna interface(SMA) x 1; 16 x 2.54 pin x 2 + 2 x 2.54 pin x 2 |
| Hardware Resource | USART x 3; SPI x 2; I2C x 2; I2S x 2; 12-bits ADC input x 25; 12-bits DAC output x 2; GPIO x 29 |
| Memory | 256KB internal FLASH; 32KB internal SRAM |
| Battery | 1/2AA Lithium |
| Low Power | Deep Sleep 6uA |
Description
Easy config
Power ON device
Config network
Connect to a LoRaWAN anetwork server
For more detailed configuration methods, please refer to the HRI-485x series Quick Start documentation.
High light
FAQ
All HRI-485X series can upgrade firmware via OTA.
No, the WiFi function only used for OTA upgrade.
Docs & Resource
- [Resource] — Schematic diagram
- [Resource] —Downloadable Resource
Packing list
The default packing list without selecting any accessories is as follows:
| Item | Quantity |
|---|---|
| LoRa Node 151 | x1 |
| Glue Rod Antenna | x1 |
| pin map sticker | x1 |
Add an Accessories
Recommend accessories for LoRa Node 151
Related products
-
HT-AT62 $5.90 -
Wireless Stick(V3) $17.90 -
Wireless Tracker $22.90
Characteristics
| Weight | 40 g |
|---|---|
| Dimensions | 8 × 6 × 3.5 cm |
| LoRa Band | 433MHz, 470~510MHz, 863~870MHz, 902~928MHz |
Reviews
There are no reviews yet.