+86 028 6237 4838
Description
Characteristics
No Reviews
Description
Summary
ESP32-C3 is a development board based on the ESP32-C3FN4 chip.
ESP32-C3FN4 is a 32-bit microprocessor based on RISC-V architecture. It is a very low-power and high-integration MCU system-level chip (SOC), integrating 2.4 GHz Wi-Fi and low-power Bluetooth (Bluetooth® LE) dual-mode wireless communication. Internal integration 4MB flash, contains SPI, I2C, UART, ADC, etc.
It is the best option for smart cities, farms, homes, industrial control, house security, wireless meter reading, and IoT developers.
Main Features
- Microprocessor: ESP32-C3FN4 (RISC-V architecture 32-bit, main frequency up to 160 MHz)
- Type-C USB interface with a complete voltage regulator, ESD protection, short circuit protection, RF shielding, and other protection measures;
- Onboard SH1.25-2 battery interface, integrated lithium battery management system(charge and discharge management, overcharge protection, battery power detection, USB / battery power automatic switching);
- Integrated WiFi, Bluetooth two network connections, onboard Wi-Fi, Bluetooth dedicated 2.4GHz PCBantenna;
- Integrated CH340K USB to serial port chip, convenient for program downloading, and debugging information printing;
- Support the Arduino development environment;
- With good RF circuit design and basic low-power design (sleep current: 10uA theoretically), it is convenient for IoT application vendors to quickly verify solutions and deploy applications;
Specifications
| Parameters | Description | Master Chip | ESP32-C3FN4(32-bit@RISC-V architecture) |
|---|---|
| USB to Serial Chip | CH340K |
| WiFi | 802.11 b/g/n, up to 150Mbps |
| Bluetooth LE | Bluetooth 5, Bluetooth mesh |
| Hardware Resource | 5*ADC1+1*ADC2; 2*UART; 1*I2C; 3*SPI; etc. |
| Memory | 384KB ROM; 400KB SRAM; 8KB RTC SRAM; 4MB SiP Flash |
| Interface | Type-C USB; 2*1.25 lithium battery interface, 2*11*2.54 Header Pin |
| Battery | 3.7V lithium battery power supply and charging |
| Power consumption | Deep Sleep 3.5uA |
| Operating Temperature | -20~70℃ |
| Dimensions | 40.64 * 20.32 * 7.6 mm |
Description
Pin Map
High light
Showing Slide 1 of 2
FAQ
No, ESP32 C3 board is the MCU without LoRa functionality.
Yes. It has the onboard SH1.25-2 battery interface.
The board has WiFi, Bluetooth.
Yes, it’s compatible with the Arduino development environment.
You can select “Wireless Mini Shell”.
Docs & Resource
- [Docs] — Development framework and library installation
- [Resource] —Datasheet
- [Resource] —Schematic Diagram (heltec.cn)
Packing list
The default packing list without selecting any accessories is as follows:
| Item | Quantity |
|---|---|
| ESP32-C3 | x1 |
Characteristics
| Weight | 15 g |
|---|---|
| Dimensions | 4.5 × 2.8 × 1.2 cm |
No Reviews
ESP32-C3 Arduino Development Board
What's this?
ESP32-C3 is a very low-power and high-integration MCU system-level chip (SOC), integrating 2.4 GHz Wi-Fi and low-power Bluetooth (Bluetooth® LE) dual-mode wireless communication.
$4.90
6 in stock
Reviews
There are no reviews yet.