You are here:
- Home
- Module & Element
- Sensor
- CO Gas Sensor
CO Gas Sensor
$9.90 Original price was: $9.90.$6.50Current price is: $6.50.
What's this?
The CO Gas Sensor based on the GM-702B chip, belongs to the Heltec Quick Link Series. The module has stamp hole packaging (LGA) that can be directly soldered onto the circuit, or compatible with the Grove socket through the PH2.0 x 4 interface.
Description
Add an Accessories
Characteristics
No Reviews
Description
Summary
The Heltec QuickLink Series element includes a wide variety of sensors and actuators. With a unified packaging size and interface, the stamp hole allows it to be directly soldered onto your board like most modules, also it can be optionally equipped with a PH2.0 x 4 interface to make it compatible with the Grove Socket.
MEMS carbon monoxide gas sensor uses the MEMS process to make a micro-hot plate on a Si substrate, and the gas sensitive material used is a metal oxide semiconductor material with low conductivity in clean air. When there is a detected gas in the ambient air, the conductivity of the sensor changes. The higher the concentration of the gas, the higher the conductivity of the sensor.
Main Features
- With unified packaging, stamp hole packaging (LGA) that can be directly soldered onto the circuit.
- Compatible with Grove socket through the PH2.0 x 4 interface.
- Strong structure and high sensitivity to carbon monoxide
Specifications
Parameters | Description |
---|---|
Supply Voltage | 3.3V |
Interfaces | I2C on PH2.0 x 4 I2C and SPI on LGA (2.54 stamp home) |
Standard Test Condition | Temperature: 20℃±2℃ Humidity: 55%RH±5%RH |
Dimension | 15*15*10mm(including QuickLink Socket) 15*15*2mm(excluding QuickLink Socket) |
Description
Dimension
![](https://heltec.org/wp-content/uploads/2023/11/7bbcda8caa3d69a9747874a80893cec.png)
FAQ
The sensor can be seamlessly integrated with the Sensor Hub Series by simply plugging it into the board. This straightforward process allows for effortless connectivity and ease of use, allowing for precise data collection and analysis.
The Sensor Hub Series is a set of devices that are designed to collect and process data from various sensors. It is important to note that most of the Sensor Hub Series is supported, although some may have specific requirements as indicated. This means that users can expect reliable and high-quality performance from the majority of the devices in this series. However, it is recommended that users consult the manufacturer’s documentation to ensure compatibility with their specific needs. By doing so, users can maximize the functionality of the devices and ensure that they are able to meet their data processing requirements.
The sensor in question is not equipped with water and dust-resistant properties. In order to attain such capabilities, it would be necessary to employ the sensor within the protective enclosure of our Sensor Hub Products.
Packing list
The default packing list without selecting any accessories is as follows:
Item | Quantity |
---|---|
CO Gas Sensor | x1 |
Add an Accessories
Characteristics
Weight | 2 g |
---|---|
Dimensions | 1.6 × 1.6 × 1 cm |
Need PH2.0 x 4 Socket? | Yes, No |
No Reviews
Be the first to review “CO Gas Sensor”
You must be logged in to post a review.
Reviews
There are no reviews yet.