HT-M01S Indoor LoRa Gateway (Phaseout)
$149.00
- Status: This product has been discontinued, not recommended for new designs.
- Alternate Products: HT-M01S Indoor LoRa Gateway (Rev.2.0)
Related products
-
WiFi LoRa 32 (V3) $17.90 – $19.90 -
Heltec Indoor Hotspot (HT-M2802) $499.00 -
-
-
Wireless Bridge $28.90 -
HT-M01S is positioned as a low-cost standard gateway for indoor use. LoRa part based on the SX1308 + 1255/7 structure, but we innovatively use ESP32 as the main control chip, and use SX1308’s hardware driver, data forwarding, and message queue, etc. are completely transplanted to the ESP32 platform without running the Linux operating system. This is the key to its low cost!
It has basic mechanical protection and dustproof structure, but it does not have waterproof performance. It can be connected to the cloud server via Wi-Fi/Ethernet, and the power supply can be Type C 5V or PoE, there also has a 1.8-inch TFT display under the tempered glass panel. Very suitable for deployment in factories, warehouses, homes and other indoor environments that can provide power and network.
This product can’t meet your needs? Choose from the Heltec Products Selecter.
HT-M01S Indoor LoRa Gateway is a part of the “Heltec LoRa“ series, with the following features:
- CE & FCC Certificate
- Ready to use LoRa Gateway
- System MCU: ESP32
- LoRa baseband: SX1308
- Emulates 49x LoRa demodulators and 1x (G)FSK demodulator
- 10 programmable parallel demodulation paths
- Dynamic data-rate adaptation (ADR)
- Automatic adaptive spread spectrum factor, SF7 to SF12 for each channel is optional
- Maximum output: 20 ± 1dBm
- Up to -139dBm sensitivity with SX1257 or SX1255 Tx/Rx front-end
- The power supply voltage:5V
- Support for LoRaWAN Class A, Class C protocols
- Through the unique heat conduction device to transfer heat to the aluminum housing, strengthen heat dissipation, make the operation more stable
- -40°C to 80°C maximum operating temperature range
- Working bands: Full band coverage corresponding to the working frequency option.
HT-M01S User Manual
HT-M01S Relevant Docs and Resources Page
Heltec LoRa Gateway Porducts Difference Table (Product Selection Table)
AutoCAD Drawing
AutoCAD 2016 Drawing: https://resource.heltec.cn/download/HT-M01S/HT-M01S.dwg
Heltec Products Selecter
How to Config HT-M01S Connect to a LoRa Server
Highly Recommend Private Open-source LoRa Server Solution
LoRaWAN Frequency Plans and Regulations by Country.
- Over View
-
HT-M01S Indoor LoRa Gateway is a part of the “Heltec LoRa“ series, with the following features:
- CE & FCC Certificate
- Ready to use LoRa Gateway
- System MCU: ESP32
- LoRa baseband: SX1308
- Emulates 49x LoRa demodulators and 1x (G)FSK demodulator
- 10 programmable parallel demodulation paths
- Dynamic data-rate adaptation (ADR)
- Automatic adaptive spread spectrum factor, SF7 to SF12 for each channel is optional
- Maximum output: 20 ± 1dBm
- Up to -139dBm sensitivity with SX1257 or SX1255 Tx/Rx front-end
- The power supply voltage:5V
- Support for LoRaWAN Class A, Class C protocols
- Through the unique heat conduction device to transfer heat to the aluminum housing, strengthen heat dissipation, make the operation more stable
- -40°C to 80°C maximum operating temperature range
- Working bands: Full band coverage corresponding to the working frequency option.
- Datasheet
- Docs & Resource
-
HT-M01S User Manual
HT-M01S Relevant Docs and Resources Page
Heltec LoRa Gateway Porducts Difference Table (Product Selection Table)
AutoCAD Drawing
AutoCAD 2016 Drawing: https://resource.heltec.cn/download/HT-M01S/HT-M01S.dwg
Heltec Products Selecter
How to Config HT-M01S Connect to a LoRa Server
Highly Recommend Private Open-source LoRa Server Solution
LoRaWAN Frequency Plans and Regulations by Country.