Sale!

CubeCell – Dev-Board

~~$13.00~~ $10.90

Include antenna;
Include SH1.25 x 2 battery connector;
Not include battery;
2.54 headers default not assemble.

Category: CubeCell SKU: ZC-51 Tags: Arduino asr LoRa Node

CubeCell (TM) is a new product series made by Heltec team, mainly for LoRa/LoRaWAN node applications.

CubeCell (TM) series is based on ASR605x (ASR6501, ASR6502), those chips are already integrated with the PSoC^® 4000 series MCU (ARM^® Cortex^® M0+ Core) and SX1262. We have done a lot of migration and development, made it perfectly support Arduino^®, can run the LoRaWAN protocol stably, can easily connect lithium batteries and solar panels.

HTCC-AB01 is a Dev-Board. Friendly designed for developers, easy to verify communication solutions.

Know more about CubeCell (TM) series

Over View
Tech Specs
Docs & Resource
Test Info
Accessories

HTCC-AB01 is a part of the “CubeCell“ series, with the following features:

Perfect Arduino-Compatible!
CE and FCC certification;
Based on ASR605x (ASR6501, ASR6502), those chips are already integrated the PSoC^® 4000 series MCU (ARM^® Cortex^® M0+ Core) and SX1262;
LoRaWAN 1.0.3 support;
Ultra low power design, 3.5uA in deep sleep;
Onboard solar energy management system, can directly connect with a 5.5~7V solar panel;
Onboard SH1.25-2 battery interface, integrated lithium battery management system (charge and discharge management, overcharge protection, battery power detection, USB / battery power automatic switching);
Micro USB interface with complete ESD protection, short circuit protection, RF shielding, and other protection measures;
Integrated CP2102 USB to serial port chip, convenient for program downloading, debugging information printing;
Good impendence matching and long communication distance.

Technical Parameters

Source	Parameter
MCU	ASR6501 (48 MHz ARM^® Cortex^® M0+ MCU, 128KB FLASH, 16KB SRAM )
LoRa Chip	ASR6501 (Internal assembled Semtech^® LoRa^® Transceiver SX1262)
LoRa working band	EU_433, CN_470_510, EU_863_870, US_902_928
LoRa maximum output power	22 ± 1dB
Hardware resources	UART x 1; SPI x 1; I2C x 1; SWD x 1; PWM x 3
	12 – bits ADC; 8 – channel DMA engine
	6 x GPIO
FLASH	128KB internal FLASH
Interface	Micro USB x 1; LoRa (IPEX) x 1
Size	41.5 x 24.1 x 7.2 mm
USB-UART bridge	CP2102
Battery Type	3.7V Lithium (SH1.25 x 2 socket)
Battery detection circuit	√
External device power control（Vext）	√
Low power design	Deep Sleep 3.5uA

Electrical characteristics

Electrical characteristics	condition	Minimum	Typical	Maximum
Power Supply	USB powered (≥500mA)	4.7V	5V	6V
	Lithium powered（≥250mA）	3.3V	3.7V	4.2V
	3.3V（pin）powered（≥150mA）	2.7V	3.3V	3.5V
	5V（pin）powered（≥500mA）	4.7V	5V	6V
Power consumption(mA)	LoRa Rx Mode		10mA
	LoRa 10dBm output		70mA
	LoRa 14dBm output		90mA
	LoRa 17dBm output		100mA
	LoRa 20dBm output		105mA
	Sleep Mode (USB powered)		9.6mA
	Sleep Mode (VBAT/battery powered)		11uA
	Sleep Mode (3.3V header powered)		3.5uA
Output	3.3V pin output			500mA
	5V pin output （USB powered only）		Equal to the input current
	External device power control (Vext 3.3V）			350mA

How to install CubeCell Arduino Development Environment

Via Git: https://github.com/HelTecAutomation/ASR650x-Arduino/blob/master/README.md
Via Arduino Board Manager: https://docs.heltec.cn/#/en/user_manual/how_to_install_ASR650x_Arduino

CubeCell Series Source code

Heltec CubeCell series Arduino framework (the basic of CubeCell series products Arduino development environment): https://github.com/HelTecAutomation/ASR650x-Arduino

HTCC-AB01 Pin out Diagram

https://github.com/HelTecAutomation/ASR650x-Arduino/blob/master/PinoutDiagram/HTCC-AB01.pdf

HTCC-AB01 Block Diagram

Heltec LoRa Node Porducts Difference Table (Product Selection Table)

https://docs.heltec.cn/#/zh_CN/products/lora/lora_node/heltec_lora_node_list_eu

Summary of Common Problems (F&Q Page)

https://docs.heltec.cn/#/en/faq/cubecell_series_common_problem_summary

Interesting applications made by CubeCell

Customer test report

LoRa 470MHz RF Power Output

LoRa 868MHz RF Power Output

Maximum communication distance test

Low power test in sleep mode

3.7V/1000mAh lithium (Sale only for mainland China)
Solar Panel
Antenna

Over View

HTCC-AB01 is a part of the “CubeCell“ series, with the following features:

Perfect Arduino-Compatible!
CE and FCC certification;
Based on ASR605x (ASR6501, ASR6502), those chips are already integrated the PSoC^® 4000 series MCU (ARM^® Cortex^® M0+ Core) and SX1262;
LoRaWAN 1.0.3 support;
Ultra low power design, 3.5uA in deep sleep;
Onboard solar energy management system, can directly connect with a 5.5~7V solar panel;
Onboard SH1.25-2 battery interface, integrated lithium battery management system (charge and discharge management, overcharge protection, battery power detection, USB / battery power automatic switching);
Micro USB interface with complete ESD protection, short circuit protection, RF shielding, and other protection measures;
Integrated CP2102 USB to serial port chip, convenient for program downloading, debugging information printing;
Good impendence matching and long communication distance.

Tech Specs

Technical Parameters

Source	Parameter
MCU	ASR6501 (48 MHz ARM^® Cortex^® M0+ MCU, 128KB FLASH, 16KB SRAM )
LoRa Chip	ASR6501 (Internal assembled Semtech^® LoRa^® Transceiver SX1262)
LoRa working band	EU_433, CN_470_510, EU_863_870, US_902_928
LoRa maximum output power	22 ± 1dB
Hardware resources	UART x 1; SPI x 1; I2C x 1; SWD x 1; PWM x 3
	12 – bits ADC; 8 – channel DMA engine
	6 x GPIO
FLASH	128KB internal FLASH
Interface	Micro USB x 1; LoRa (IPEX) x 1
Size	41.5 x 24.1 x 7.2 mm
USB-UART bridge	CP2102
Battery Type	3.7V Lithium (SH1.25 x 2 socket)
Battery detection circuit	√
External device power control（Vext）	√
Low power design	Deep Sleep 3.5uA