CubeCell Module Plus
$11.80 $9.40
note
accessories
reseller
- This is a module, must work with other PCB board.
- 3.7V/1000mAh lithium(Sale only for mainland China)
- Solar Panel
- Antenna
Related products
-
CubeCell Capsule Solar Sensor $19.40 – $27.50 -
CubeCell GPS-6502$24.00$19.80 -
CubeCell Dev-Board Plus$18.50$14.40 -
CubeCell capsule Debug$6.00$4.50 -
CubeCell - Capsule Sensor $16.30 – $22.00 -
CubeCell - Module$9.90$8.60
CubeCell (TM) is a new product series made by Heltec team, mainly for LoRa/LoRaWAN node applications.
CubeCell (TM) series is based on ASR605x (ASR6501, ASR6502), those chips are already integrated with the PSoC® 4000 series MCU (ARM® Cortex® M0+ Core) and SX1262. We have done a lot of migration and development, made it perfectly support Arduino®, can run the LoRaWAN protocol stably, and can easily connect lithium batteries and solar panels.
HTCC-AM02 is a Module. Supports AT transparent transmission commands, can be directly integrated into the application circuit.
Know more about CubeCell series. Or choose from the Heltec LoRa Node family.
HTCC-AM02 is a part of the “CubeCell“ series, with the following features:
- Perfect Arduino-Compatible!
- CE and FCC certification;
- Based on ASR6502, this chip is already integrated the PSoC® 4000 series MCU (ARM® Cortex® M0+ Core) and SX1262;
- LoRaWAN 1.0.2 support;
- Ultra low power design, 3.5uA in deep sleep;
- 1.27 stamp edge design for SMT;
- Good impedance matching and long communication distance.
Technical Parameters
| Source | Parameter | |
| MCU | ASR6502 (48 MHz ARM® Cortex® M0+ MCU, 128KB FLASH, 16KB SRAM ) | |
| LoRa Chip | ASR6502 (Internal assembled Semtech® LoRa® Transceiver SX1262) | |
| LoRa working band | EU_433, CN_470_510, EU_863_870, US_902_928 | |
| LoRa maximum output power | 21dB ± 1dB | |
| Hardware resources | UART x 2; SPI x 2; I2C x 2; SWD x 1;ADC x 3; COMP x 1 | |
| 12 – bits ADC; 8 – channel DMA engine | ||
| 14 x GPIO | ||
| FLASH | 128KB internal FLASH | |
| Interface | 1.27X(12X2 +11) stamp edge; LoRa Antenna (IPEX) x 1 | |
| Size | 20.32 x 20.32 x 2 mm | |
| Low power design | Deep Sleep 3.5uA | |
Electrical characteristics
| Electrical characteristics | condition | Minimum | Typical | Maximum |
| Power Supply | 3.3V（pin）powered（≥150mA） | 2.7V | 3.3V | 3.5V |
| Power consumption(mA) | LoRa Rx Mode | 10mA | ||
| LoRa 10dBm output | 70mA | |||
| LoRa 14dBm output | 90mA | |||
| LoRa 17dBm output | 100mA | |||
| LoRa 20dBm output | 105mA | |||
| Sleep Mode (3.3V header powered) | 3.5uA |
How to install CubeCell Arduino Development Environment
CubeCell Series Source code
Heltec CubeCell series Arduino framework (the basic of CubeCell series products Arduino development environment): https://github.com/HelTecAutomation/ASR650x-Arduino
HTCC-AM02 Module Pin out Diagram
Heltec LoRa Node Porducts Difference Table (Product Selection Table)
Frequently Asked Questions
LoRa 470MHz RF Power Output
LoRa 868MHz RF Power Output
Maximum communication distance test
- Over View
-
HTCC-AM02 is a part of the “CubeCell“ series, with the following features:
- Perfect Arduino-Compatible!
- CE and FCC certification;
- Based on ASR6502, this chip is already integrated the PSoC® 4000 series MCU (ARM® Cortex® M0+ Core) and SX1262;
- LoRaWAN 1.0.2 support;
- Ultra low power design, 3.5uA in deep sleep;
- 1.27 stamp edge design for SMT;
- Good impedance matching and long communication distance.
- Tech Specs
-
Technical Parameters
Source Parameter MCU ASR6502 (48 MHz ARM® Cortex® M0+ MCU, 128KB FLASH, 16KB SRAM ) LoRa Chip ASR6502 (Internal assembled Semtech® LoRa® Transceiver SX1262) LoRa working band EU_433, CN_470_510, EU_863_870, US_902_928 LoRa maximum output power 21dB ± 1dB Hardware resources UART x 2; SPI x 2; I2C x 2; SWD x 1;ADC x 3; COMP x 1 12 – bits ADC; 8 – channel DMA engine 14 x GPIO FLASH 128KB internal FLASH Interface 1.27X(12X2 +11) stamp edge; LoRa Antenna (IPEX) x 1 Size 20.32 x 20.32 x 2 mm Low power design Deep Sleep 3.5uA Electrical characteristics
Electrical characteristics condition Minimum Typical Maximum Power Supply 3.3V（pin）powered（≥150mA） 2.7V 3.3V 3.5V Power consumption(mA) LoRa Rx Mode 10mA LoRa 10dBm output 70mA LoRa 14dBm output 90mA LoRa 17dBm output 100mA LoRa 20dBm output 105mA Sleep Mode (3.3V header powered) 3.5uA - Docs & Resource
-
How to install CubeCell Arduino Development Environment
CubeCell Series Source code
Heltec CubeCell series Arduino framework (the basic of CubeCell series products Arduino development environment): https://github.com/HelTecAutomation/ASR650x-Arduino
HTCC-AM02 Module Pin out Diagram
Heltec LoRa Node Porducts Difference Table (Product Selection Table)
Frequently Asked Questions
- Test Info
-
LoRa 470MHz RF Power Output
LoRa 868MHz RF Power Output
Maximum communication distance test
