Description
Add an Accessories
Characteristics
No Reviews
Description
Summary
In order to meet the user’s requirements for Ultra-Low-Power and standard LoRaWAN protocol, we designed this product. On the basis of STM32L151CBU6MCU and SX1278 LoRa chip(433、470MHz), the low power current can reach to 6uA.
Main Features
- CE Certificate;
- Microprocessor: STM32L151CBU6 (Ultra-low-power ARM Cortex-M3 MCU with 128 Kbytes Flash), with LoRa node chip SX1278 (433MHz ~ 510MHz);
- Micro USB interface with a complete voltage regulator, ESD protection, short circuit protection, and other protection measures;
- Onboard SH1.25-2 battery interface, integrated lithium battery interface, integrated battery management system (battery power detection, USB / battery power automatic switching);
- Integrated CP2102 USB to serial port chip, convenient for program downloading, debugging information printing;
- This product supports DFU mode download (need to cooperate with relevant download software).
- System resource:FLASH – 128K, RAM – 16K, EEPROM – 4K;
- User available resources: FLASH – 64K, RAM – 8K, EEPROM – 4K;
- Provide standard LoRaWAN protocol routines.
- With good RF circuit design and basic low-power design (sleep current ≤7uA), it is convenient for IoT application vendors to quickly verify LoRaWAN protocol easily.
Specifications
Parameters | Description | Master Chip | STM32L151CBU6(Ultra-low-power 32-bit MCU ARM®-based Cortex®-M3) |
---|---|
LoRa Chipset | SX1278 |
Frequency | 470~510MHz, 863~928MHz |
Max. TX Power | 19 ± 1dBm |
Max. Receiving Sensitivity | -135dBm |
Operating temperature | -20 ~ 70 ℃ |
Dimensions | 56.3 x 25.5 x 7.8 mm |
Interface | Micro USB x 1; LoRa Antenna interface(IPEX) x 1; 18 x 2.54 pin |
Hardware Resource | UART x 3; SPI x 2; I2C x 2; 12-bits ADC input x 8; 12-bits DAC output x 2; GPIO x 23 |
Memory | 128KB internal FLASH; 16KB internal SRAM |
Battery | 3.7V Lithium(SH1.25 x 2 socket) |
Low Power | Deep Sleep 6uA |
Description
Schematic Diagram
High light
LoRaWAN with AT command supported
The HT-AT62 is composed of an MCU (32-bit T-Head Microsystems) and Semtech LoRa Transceivers (SX1262).
Regarding the software side, it already integrated LoRaWAN 1.0.2 protocol with AT command support.
FAQ
All HRI-485X series can upgrade firmware via OTA.
No, the WiFi function only used for OTA upgrade.
Docs & Resource
- [Resource] — Schematic diagram
- [Resource] —Downloadable Resource
Packing list
The default packing list without selecting any accessories is as follows:
Item | Quantity |
---|---|
LoRa Kit 151 | x1 |
Glue Rod Antenna | x1 |
SH1.25 x 2 battery connector | x1 |
Add an Accessories
Recommend accessories for LoRa Kit 151
Related products
-
CubeCell GPS-6502 (HTCC-AB02S) $25.80 – $25.90
Characteristics
Weight | 20 g |
---|---|
Dimensions | 8 × 3.5 × 1.6 cm |
LoRa Band | 433MHz, 470~510MHz, 863~870MHz, 902~928MHz |
No Reviews
Be the first to review “LoRa Kit 151”
You must be logged in to post a review.
Reviews
There are no reviews yet.