+86 028 6237 4838
You are here:
Description
Characteristics
No Reviews
Description
Summary
The Heltec QuickLink Series element includes a wide variety of sensors and actuators. With a unified packaging size and interface, the stamp hole allows it to be directly soldered onto your board like most modules, also it can be optionally equipped with a PH2.0 x 4 interface to make it compatible with the Grove Socket.
The MAX30100 is an integrated pulse oximetry and heart rate monitor sensor solution. It combines two LEDs, a photodetector, optimized optics, and low-noise analog signal processing to detect pulse oximetry and heart-rate signals.
Main Features
- With unified packaging, stamp hole packaging (LGA) that can be directly soldered onto the circuit.
- Compatible with Grove socket through the PH2.0 x 4 interface.
- Strong structure and high sensitivity
Specifications
| Parameters | Description |
|---|---|
| Power-Supply Voltage | 3.3V |
| Low Shutdown Current | 0.7μA |
| Supply Current | 600μA |
| Dimension | 15mm*15mm*10mm(including Quick Link Socket) 15mm*15mm*2mm(excluding Quick Link Socket) |
| Interfaces | I2C on PH2.0 x 4 I2C and SPI on LGA (2.54 stamp home) |
| Operating Temperature Range | -40~85℃ |
| Storage Temperature Range | -40~105℃ |
Description
Dimension
FAQ
The installation of the sensor onto the TinyShell system can be accomplished with ease by inserting it into the extension board.
The device offers two I2C interfaces, a UART, and GPIO, all of which are easily accessible for use.
This expansion board is fully compatible with the Arduino platform and is designed to seamlessly integrate with all Quick Link sensors. With this expansion board, users can expect a reliable and efficient connection between their Arduino board and Quick Link sensors.
Packing list
The default packing list without selecting any accessories is as follows:
| Item | Quantity |
|---|---|
| Pulse Oximeter and Heart-Rate Sensor | x1 |
Characteristics
| Weight | 2 g |
|---|---|
| Dimensions | 2 × 2 × 1 cm |
| Need PH2.0 x 4 Socket? | Yes, No |
No Reviews
Pulse Oximeter and Heart-Rate Sensor
What's this?
The Pulse Oximeter and Heart-Rate Sensor based on the MAX30100 chip, belongs to the Heltec Quick Link Series. The module has stamp hole packaging (LGA) that can be directly soldered onto the circuit, or compatible with the Grove socket through the PH2.0 x 4 interface.
Original price was: $3.90.$3.00Current price is: $3.00.
Reviews
There are no reviews yet.